Home › Equipment guides
Used Excavator, Dozer and Wheel Loader Inspection Checklist
Before you pay for a used excavator, dozer or wheel loader, confirm three things: the seller owns it free of liens, the machine matches its paperwork, and its condition justifies the price. That means checking the serial number and lien records, watching a cold start, running every hydraulic function under load, measuring or photographing wear on the undercarriage and pins, and paying through a method that protects you if any of it turns out to be wrong.
This checklist runs in the order you would do it on site. Where a check needs a specialist, such as fluid analysis or undercarriage measurement, it says so. It is general information, not a substitute for an inspection by a qualified heavy equipment technician.
1. Paperwork, serial number and liens
Start with the documents, because a machine with a title problem is a bad buy at any price.
- Find the product identification number (PIN) or serial plate on the machine, usually on the frame. Photograph it and check that it matches the bill of sale, invoices and any registration or title documents.
- Look for signs the plate has been removed, re-riveted or ground off. A missing or altered plate is a reason to walk away.
- Search for liens. Under Article 9 of the Uniform Commercial Code, a financing statement against a business is generally filed in the state where the debtor is located, so search the secretary of state's UCC records for the seller's state, under the seller's exact legal name.
- If a lender appears, get a written payoff and release plan before any money moves.
- Ask for service records, the hour meter reading and the dealer or manufacturer's warranty status, if any remains.
Machines are also stolen and resold, so if the price looks too good, ask the seller how they acquired it and check whether the manufacturer's dealer can confirm the serial number's history.
2. Cold start and engine
Ask the seller not to run the machine before you arrive. A warm engine hides hard starting, smoke and noises that only show when cold. Put your hand on the engine or exhaust when you get there to check.
- Watch the exhaust at start-up. Brief light smoke can be normal on a cold diesel. Heavy blue smoke suggests oil burning; persistent white smoke can mean coolant or injection problems.
- Listen for knocking, ticking or uneven running as it warms up.
- Check for blow-by: heavy fumes from the crankcase breather once warm point to worn rings or liners.
- Look at the oil on the dipstick and the coolant in the overflow. Milky oil or oily coolant is a serious warning sign.
- Scan for active fault codes on the display, if the machine has one, and photograph them.
Fluid analysis is cheap compared with an engine rebuild. A lab can test engine oil, hydraulic oil and coolant for wear metals, fuel, coolant contamination and dirt. Ask permission to take samples, or ask the seller for recent results.
3. Hydraulics under load
Hydraulic repairs are some of the most expensive on these machines, and many problems only show under load.
- Run every function through its full travel: boom, stick, bucket, swing and blade, or lift and tilt on a loader.
- Time a few full cycles. Slow functions compared with similar machines can mean a worn pump or internal leakage.
- With the boom raised and loaded, stop and watch for drift. A boom or bucket that creeps down when held points to worn cylinder seals or valves.
- Walk round every cylinder, hose and fitting. Look for weeping rod seals, scored or pitted cylinder rods, and hoses that are cracked, rubbed or recently replaced in only one spot.
- Listen for the pump whining or the relief valve squealing during normal work.
Ask why any single hose or seal is brand new. A fresh part can be routine maintenance, or a quick fix before sale.
4. Undercarriage, tracks and tires
On a tracked machine the undercarriage can be a large share of the machine's value. Check it carefully or bring someone who can measure it.
| Component | What to look for |
|---|---|
| Track chains and bushings | Stretch, worn or turned bushings, excessive sag |
| Sprockets | Hooked or pointed teeth |
| Rollers and idlers | Flat spots, leaking seals, rollers that do not turn |
| Shoes or grousers | Worn-down grousers, cracks, missing bolts |
| Track frame | Cracks, weld repairs, bent guards |
| Loader tires | Tread depth, cuts in sidewalls, mismatched tires, signs of repair |
Undercarriage wear is usually measured against the manufacturer's specifications, so a dealer or undercarriage specialist can give you a percentage worn for the main components. That number is worth having before you negotiate.
5. Structure, pins and bushings
Cracks and welding on the boom, stick, loader arms or frame matter because they can grow under load.
- Look closely at high-stress areas: where the boom meets the frame, around cylinder mounts, the bucket linkage and the loader arms.
- Fresh paint over one small area is worth a closer look.
- Check pins and bushings for play. Have someone gently move the bucket while you watch each joint. Visible movement and clunking mean worn pins and bushings.
- Check the bucket or blade for worn cutting edges, cracked teeth or adapters, and bent side cutters.
- Look at the swing bearing on an excavator: unusual play or noise when swinging is expensive to fix.
6. Travel, brakes and a working test
Drive the machine forward and backward in a straight line on firm ground. A tracked machine should track straight without pulling to one side; pulling can point to a final drive or travel motor problem. Listen to each final drive for grinding, and check them for oil leaks. On a wheel loader, test the brakes, the parking brake, steering at full lock in both directions, and every gear.
If the seller allows it, dig, push or lift a real load for a few minutes. Many faults only appear when the machine is working hard and hot, so a test that only moves the controls in the air can miss them.
7. Cab, safety and controls
The cab tells you how the machine was looked after. Check that the rollover or falling-object protective structure is intact and not cut, drilled or welded, that the seat belt works, and that lights, horn, backup alarm, gauges and wipers function. Controls should move smoothly and return to neutral. Heavy wear on pedals and joysticks that does not match the hour meter reading is worth questioning, because meters can be replaced.
8. Paying safely
Wire transfer fraud is a real risk in equipment sales. Criminals send fake invoices or change bank details by email at the last minute. The FBI's Internet Crime Complaint Center (IC3) collects reports of this type of fraud.
- Confirm the seller's bank details by phone, using a number you found independently, not one in the email.
- Treat any last-minute change of bank account as a red flag until confirmed by phone.
- Consider an escrow service or paying through a dealer or auction house with a clear payment process.
- Get a signed bill of sale listing the serial number, hours, price and any lien release.
- Arrange transport and insurance before the machine leaves the seller's yard.
If you are financing the purchase, your lender may require its own inspection or appraisal. Ask before you commit, so you do not pay for two inspections.
Buffalo Pitts is a name with a long industrial history, and this site also covers it. If you are interested in the machines that came before modern equipment, see the Buffalo Pitts history page, the steam tractor patents archive and the photo archive.
Frequently asked questions
How many hours is too many on a used excavator?
There is no single cut-off. A well-maintained machine with high hours can be a better buy than a neglected one with low hours. Look at service records, fluid analysis results, undercarriage wear and the condition of pins and hydraulics together, and treat the hour meter as one input, not the answer.
How do I check for liens on used construction equipment?
Search the UCC filings at the secretary of state's office for the state where the seller is located, using the seller's exact legal name. If a financing statement appears, ask the lender for a payoff letter and a release, and make sure the lien is cleared as part of the sale.
Is fluid analysis worth it on a used machine?
Usually, yes. Lab analysis of engine and hydraulic oil can show wear metals, coolant or fuel contamination, and dirt that you cannot see on a dipstick. It costs far less than a major repair and gives you evidence to support a price negotiation or a decision to walk away.
Should I bring a mechanic to inspect used heavy equipment?
If you are not experienced with that type of machine, a qualified heavy equipment technician or dealer inspection is worth paying for. They can measure undercarriage wear, read fault codes and spot weld repairs or hydraulic issues that are easy to miss on a short walk-round.
What is the safest way to pay for used equipment?
Pay only after confirming ownership and liens, use a payment method with a clear paper trail, and verify bank details by phone using a number you found yourself. Escrow, a dealer or an auction house with a defined payment process adds protection compared with a direct wire to a private seller.